WARNING

IT IS THE RESPONSIBILITY OF THE PERSON INSTALLING ANY BRAKE COMPONENT OR KIT TO DETERMINE THE SUITABILITY OF THE COMPONENT OR KIT FOR THAT PAR- TICULAR APPLICATION. IF YOU ARE NOT SURE HOW TO SAFELY USE THIS BRAKE COMPONENT OR KIT, YOU SHOULD NOT INSTALL OR USE IT. DO NOT ASSUME ANYTHING. IMPROPERLY INSTALLED OR MAINTAINED BRAKES ARE DANGEROUS. IF YOU ARE NOT SURE, GET HELP OR RETURN THE PRODUCT. YOU MAY OBTAIN ADDITIONAL INFOR- MATION AND TECHNICAL SUPPORT BY CALLING 817-733-8009 OR VISIT OUR WEBSITE WWW.DEEMAXXCOMPONENTS.COM. USE OF DEEMAXX TECHNICAL SUPPORT DOES NOT GUARANTEE PROPER INSTALLATION. YOU OR THE PERSON WHO DOES THE INSTALLATION MUST KNOW HOW TO PROPERLY USE THIS PRODUCT. IT IS NOT POSSIBLE OVER THE PHONE TO UNDERSTAND OR FORESEE ALL THE ISSUES THAT MIGHT ARISE IN YOUR INSTALLATION.

* BRAKE PAD SETS ARE PACKAGED AND SOLD IN AXLE SETS, 4 PADS TO A BOX.

DOT APPROVAL FOR HIGHWAY USE

With the exception of brake hoses and brake fluid, there are no State or Federal DOT specifications regarding the materials, processes, or style for the other components within a brake system. Specification that would regulate calipers, rotors, hats, hubs, braked pads, and other individual components within the brake system do not exist. It is the responsibility of the trailer manufacturer to configure a trailers brake system to perform within Federal Motor Vehicle Safety Standards. It is therefore NOT accurate to identify any brake system component other than hoses or fluid as "DOT approved"

WARNING • DO NOT OPERATE ANY TRAILER ON UNTESTED BRAKES!

BEFORE PULLING THE TRAILER, TEST THE BRAKES UNDER CONTROLLED CONDITIONS IN A SAFE AREA. TEST THE SYSTEM IN STATIC CONDITIONS FOR THE ABILITY TO HOLD PRESSURE BEFORE ATTEMPTING TO MOVE THE TRAILER. ALWAYS UTILIZE SAFETY RESTRAINT SYSTEMS AND ALL OTHER REQUIRED SAFETY EQUIPMENT WHILE PULLING THE TRAILER.

WARNING: The user or installer of any product from this catalog must determine its suitability for their intended purpose or application.